Display for reference force transducers model INDI 00
The INDI-00 is a high accuracy portable indicator designed to be used in combination with standard reference force transducers with accuracy class 0.5 and 00 following the norm ISO376.
- Display 6 digits (red leds of 15 mm)
- Units Newton, kilo Newton or mV/V
- Input Wheatstone bridge (6 wires - 50ohms min.)
- Maximum 4 mV/V
- Transducer supply 5 Volt (inverted polarity - 29 Hz)
- Accuracy class 0.01 %
- Non-linearity <= 0.002 % of full scale
- Input resolution 0.1 V/V per digit
- Internal resolution 550.000 divisions
- Conversion speed 17 / s
- Thermal stability of zero <= 2 ppm/°C
- Thermal stability of span <= 2 ppm/°C
- Long term stability <= 0.005 % of full scale per year
- Digital outputs RS-232C or (RS-485 on option)
- Analog output (option) 0..10 Volt or 4..20 mA (16 bits - drain)
- 2 independant set points (option) 24 VDC - 100 mA (transistor output)
- Power supply 230 VAC (option:internal rechargeable battery)
- Operating temperature from -10 to +40°C
- Storage temperature from -10 to +70°C
- Humidity 90 % RH
- Protection IP 54
- Internal calibration resistor activated by push button on the front plate
- Weight 6.7 kg
- Acquisition and management software (see specific documentation)
